The following are typical minimum maintenance requirements.

Periodically/Daily (8 Hours Maximum)

• Monitor all gauges and indicators for normal operation.
• Check lubricant level and top off as necessary.
• Check for lubricant leaks.
• Check for unusual noise or vibration.
• Drain water from air/lubricant reservoir.
• Drain control line filter.

Weekly

• Check safety valve operation.

Monthly

• Service air filter as needed (daily or weekly if extremely dusty conditions exist).
• Wipe down entire unit to maintain appearance.
• Check drive motor amps at compressor full capacity and design pressure.
• Check operation of all controls.
• Check operation of lubricant scavenger/return system. Clean, as necessary.

Periodically/Annually

• Go over unit and check all bolts for tightness.
• Change air/lubricant separator.
• Change air filter.
• Lubricate motors per manufacturer’s instructions.
• Check safety shutdown system. Contact authorized service person.